Email:

Popular Searches

  • Boob 54 established that sandcrete blocks prepared by partially replacing sand with sawdust gave optimum and desired results from a 1 6 cement sand sawdust 85 sand 15 sawdust mix ratio The compressive strength obtained from 100 mm 100 mm 100 mm blocks for this mix...

  • COMPRESSIVE STRENGTH After 28 days curing the 3 sample are tested and average compressive strength of 5000mm2 cube was shown in fig2 and it is clear from graph that till 5 replacement there is no effect on strength as compare to control mix Further increase in granite powder replacement up to 20 compressive strength kept on...

  • MLA Style NigarilaR RajalakshmiN Deepan Chakravarthi AV Strength And Durability of Concrete Block By Partial Replacement of Cement With Granite Dust And Fine Aggregate With M-Sand International Journal of Recent Engineering Science 73 2020 12-18 APA Style NigarilaR RajalakshmiN Deepan Chakravarthi AV Strength And Durability of Concrete Block By Partial...

  • Mar 30 2018 0183 32 At 28 days of curing river sand concrete exceeded the target compressive strength by 36 whereas quarry dust concrete was less than the target compressive strength by 12 Both river sand concrete and quarry dust concrete for the selected water/cement ratio and mix ratio are suitable for non-structural applications and lightly-loaded members...

  • However the compressive strength of the blocks is lower than the average compressive strength of sandcrete blocks produced manually by Odeyemi et al 2015 age 7...

  • Keywords Compressive Strength sandcrete blocks quarry dust construction INTRODUCTION The quality and cost effectiveness of construction materials employed in housing development are among the major factors that determines the optimal delivery of housing projects in Nigeria Akutu 1983 Therefore materials to be used for building...

  • This work investigated the effect of partial replacement of sand with quarry dust on the compressive strength flexural strength split tensile strength and water absorption of sandcrete blocks River sand was replaced with quarry dust at percentages ranging from 0 to 40 at cement/combined aggregate ratio of 1 6 The blocks were moulded using a Rosa Commetta block laying machine and were...

  • Results of the tests show that the inclusion of granite fines in the sand-cement matrix has a very significant effect on the compressive strength of sandcrete blocks It was also observed that for both mix proportions 15 granite fines content is the optimum for improved structural performance...

  • effect of mortar thickness on the compressive strength characteristics of masonry prisms with solid blocks prototyped with granite dust GD and M-sand MS The solid blocks are produced by a constant replacement of cement by 10 of granite dust and in replacement of fine aggregate by MS in proportions of 0 20 40...

  • Chemical Composition of MHA 4 Compressive Strength N/mm Constituent Percentage Composition 2 35 SiO2 637 3 Al2O3 380 25 Fe2O3 260 2 CaO 002 15 MgO 003 1 Na2O 114 05 K2O 201 0 P2O3 410 0 10 20 30 40 MHA MHA MHA MHA MHA MnO 005 Sandcrete Block Mix SO3 206 7 Days 14 Days 28 Days TiO3 016 Cl 215 Br 007...

  • Two sets of control samples were produced in the laboratory using mix ratios of 1 8 and 1 6 Dust Blocks The effect on the compressive strength of sandcrete blocks in the sense that...

  • This work investigated the effect of partial replacement of sand with quarry dust on the compressive strength flexural strength split tensile strength and water absorption of sandcrete blocks River sand was replaced with quarry dust at percentages ranging from 0...

  • producing sandcrete blocks However a study conducted by Oyetola and Abdullahi 12 on the compressive strength of sandcrete blocks containing Rice Husk Ash RHA as a sup-plementary cementitious material indicates a reduction in compressive strength with an increase in RHA content Still an optimum replacement level of 20 was achieved...

  • Dec 01 2020 0183 32 The impact on the compressive strength of 28 days is similar and at a later age 90 and 180 days when using CEM I 42 5 R there is an increase in strength by 6 5 and 10 5 respectively and with the use of CEM I 32 5 R by 15 5 and 21 3 compared to the control samples without granite dust...

  • A list of 117 mixes that meet NIS 87 2004 recommended minimum compressive strength of 345Nmm-2 for load bearing sandcrete blocks was established It is recommended that the inclusion of quarry dust in sandcrete block production be encouraged especially in areas where quality sand for sandcrete block production is scarce and expensive...

  • block prepared in proportion of 1 6 cement 85 sand 15 saw dust since compressive strength for this ratio is found to be 45 N/MM2 under gunny bag curing condition and provides optimum desired result Keyword -Saw dust sandcrete blocks compressive strength water cement ratio Density I INTRODUCTION...

  • Dec 01 2004 0183 32 There are four sand types used for manufacture of sandcrete blocks They are pit sand sea sand river sand and crushed stone sand Pit run sand is the most predominant Sand accounts for about 75 of the volume of the mix It is a filler and a sure indicator of the expected compressive strength of sandcrete block...

  • Academiaedu is a platform for academics to share research papers...

  • Sandcrete blocks constitute a unique class amongst man-made structural component for building in civil engineering work For example in buildings walls are constructed using blocks as either load bearing or non-land bearing to provide shelter...

  • The percentage of granite fines replacement used in this research are 0 5 10 15 20 25 and 100 Result of the experiment showed that the inclusion of granite fines in the sand cement enhanced the compressive strength of sandcrete block Sandcrete blocks made with 1 6 mix proportion using 15 granite fines replacement gave optimum...

  • The results of the experimental programme indicate that with the right constituent materials manufacturing and curing processes it is possible to improve the compressive strength of sandcrete blocks to over 70N/mm2 the minimum specfied by the British Standards with a lean mix of 1 12 cement/sand ratio...

  • optimizing compressive strength characteristics of hollow building blocks frombuilding blocks from granite quarry dust and sandgranite quarry dust and sandgranite quarry dust and sand ssss oooo osujiosuji111 1 andaannddand b n egbonb n egbonb n egbon 2222...

  • The compressive strength of the Sandcrete blocks is below standard recommended by the Nigerian Industrial Standards NIS 87 2000 sand or crushed stone dust mixed the maximum compressive...

  • Jul 10 2016 0183 32 Elmoaty 2013 studied the effect of granite dust as partial replacement and addition of cement in concrete and observed that when cement was replaced by granite dust the compressive strength decreased with increase in amount of granite dust The utilization of granite dust up to 5 improved the concrete s compressive strength by 82 at the...

  • Blocks of same mix shall be taken and divide them as follows to conduct the following tests Dimension measurement All blocks Density of block 3 blocks Compressive strength of block 8 blocks Dimension Measurement All blocks should be checked in this step The length width and height are measured with steel scale...

  • It was found that 05 water/cement ratio produced higher compressive strengths for 1 1 2 mix while 06 water/cement ratio exhibit better workability for 1 15 3 mix proportion Specifically compressive strength ranged from 17-342 N/mm for the mixes considered These results compare favourably with those of conventional concrete...

  • Mar 01 2020 0183 32 After curing the blocks for 7 days the blocks made with cement and river sand had the highest average compressive strength of 208 N/mm 2 compared with the rest the difference between the average compressive strength of the blocks made with cement and quarry dust which is 191 N/mm 2 is not so much...

  • Testing of Sandcrete Blocks 1 Compressive Strength Test This test is used to evaluate compressive strength of sandcrete block Compression strength is the ability of blocks to resist an axially applied load on the edge or the bed face of the block Compression testing machine is employed to evaluate the compressive strength of blocks...

  • Compressive Strength and Costs of Sandcrete Blocks and Blocks cost implications The finding proves that blocks made with quarry dust are In most villages mud and clay materials are still being used for wall making with their acceptability as last alternative for the poor but with some level of quality sandcrete block sample was sourced as river sharp sand while the cement used for...

  • 7 14 28 56 and 90 days on compressive strength split tensile strength modulus of elasticity drying shrinkage and water penetration of concrete were studied Their results indicated that the increase in the proportions of granite powder resulted in a decrease in the compressive strength of concrete...

Get Solutions & Quotation

If you can not chat online or send an e-mail at the moment, you can fill out the following form, leaving your contact information, we will contact you as soon as possible to meet any of your requirements!